Prepare base as you would for a standard paver installation. Lay sheets down on prepared base.

Run compactor over stone surface and wet application prior to filling joints.

Apply EcoSystems Grout, water permeable silica epoxy mortar. Joints can also be filled with other materials such as course sand, stabilized sand or fine gravel. It is not recommended to use stablized sand or course sand in areas intended for vehicle traffic.

Wet stones thoroughly. Squeegee EuroGrout D-2000 over entire stone surface removing excess sand from the top of stones.

Enjoy your Cobble Systems application for years to come!

Use 3/4” cobble for indoors. Apply sheets over suitable adhesive on properly prepared subfloor. Fill joints with suitable sanded grout or saltillo tile grout.